Have a question about our products or can't find what you're looking for ?
- Flooring
AW421 Industrial Cleaner
AW421 is a powerful solvent-based cleaning solution for dissolving and removing mastics, adhesives and sealants.
CS100 Epoxy Primer
CS100 Epoxy Primer is a two part water based epoxy primer and bonding agent.
CS150 Acrylic Primer
CS150 Acrylic Primer is a universal primer for porous substrates.
CS175 Epoxy Primer for Porous Substrates
CS175 is a two part water based epoxy primer.
CS190 Gritty Primer
CS190 Gritty Primer is a ready mixed, ready to use rapid drying primer that can be used on both absorbent and non-absorbent substrates. CS190 provides a textured surface which gives an excellent bonding surface for self-levelling/smoothing compounds and screeds.
CS200 Compriband Epoxy Primer
CS200 is a two part epoxy resin system consisting of a base component containing solvent free epoxide resin plus a low viscosity liquid hardener. CS200 is applied using a suitable paint brush to give a thin continuous bond layer to clean prepared surfaces. CS200 is used as a bonding primer for [...]
CS350 Self Smoothing Epoxy Screed
CS350 is a high performance self smoothing epoxy resin flooring system. It provides a hygienic, dust free floor with excellent mechanical and chemical resistance.
CS375 Industrial Wearing Screed
CS375 is a cementitious, self levelling flooring compound for interior applications.
CS900 High Build Epoxy Coating
CS900 is a high build, thickly applied solvent free coating possessing excellent wear and acid resistance. The finished product is attractive and tough enough to withstand industrial usage. Once cured, CS900 offers excellent chemical and abrasion resistance.
CS930 Epoxy Dustproofer
CS930 is a hard wearing, hygienic, attractive, and solvent free water dispersed epoxy floor coating. Good adhesion to most clean and dry substrates. Excellent chemical and wear resistance.
CS980 Concrete and Paving Sealer
CS980 penetrates deep porous concrete and hardens to provide a dustproofed surface. It can also assist with stabilising jointing sand, or to protect the integrity of block paving.
ES100 One Coat Universal DPM
ES100 is a two part, epoxy based damp proof membrane.
ES200 Fast Curing Universal DPM
ES200 is a solvent free, two part, epoxy based damp proof membrane which achieves emicode EC1 status.
ES300 Surface DPM
ES300 is a two part epoxy moisture vapour suppressant and surface damp proof membrane.
ES400 Bulk DPM
ES400 is a two part epoxy moisture vapour suppressant and surface damp proof membrane.
ES500 Sheet Membrane
ES500 is a specially coated fibreglass underlay and acts as a continuous barrier substrate, is moisture resistant to damp with resin peduncles on the underside.
ES600 Moisture Vapour Suppressant
ES600 is a ready for use, one part, water-based moisture vapour suppressant.
SF105 Acrylic Adhesive for PVC and Linoleum
SF105 is a thixotropic water-borne floor covering adhesive.
SF108 Pressure Sensitive Acrylic Adhesive
SF108 is a pressure sensitive adhesive for bonding most rubber and vinyl floor coverings as well as vinyl wall coverings.
SF109 High Performance, High Temperature Adhesive
SF109 is a solvent-free co-polymer, fibre-reinforced emulsion adhesive.
SF110 Carpet Adhesive
SF110 is a water based synthetic latex multi-purpose adhesive which has good bond strength and a long open time, is easy to trowel and is non-staining.
SF115 Contact Adhesive
SF115 is a one part, modified elastomer contact adhesive for use with rubber and PVC.
SF165 Water Resistant Contact Adhesive
SF165 is a cross-linking contact adhesive.
SF200 Carpet Tile Tackifier
SF200 is a single component, white waterborne liquid adhesive, which dries to a clear, permanently tacky film.
SF404 Fire Retardant Epoxy Adhesive
SF404 is a two part epoxy based, self extinguishing adhesive of thixotropic consistency, formulated for ambient temperature curing.
SF512 Water Resistant Adhesive
SF512 is a single component product derived from advanced MS polymer technology, for use with PVC & rubber flooring.
SF520 Flexible Wood Adhesive
A high strength, flexible, single component advanced polymer adhesive for surface bonding most wood flooring.
SF550 Flexible Wood Adhesive - Gun Grade
A high strength, flexible, single component advanced polymer adhesive for surface bonding most wood flooring. Packed in a handy 600 ml sausage for edge work or general usage.
SF600 Multi-Purpose Polyurethane Adhesive
SF600 is a two part polyurethane adhesive formulated for ambient temperature cure.
SX070 Feather Finish Compound
SX070 is a rapid drying feather finish compound for interior applications
SX100 Renovation Screed
SX100 is a fibre reinforced, self-levelling flooring compound for interior applications.
SX200 General Purpose Smoothing Compound
SX200 is a fast drying, self levelling, pump applied underlayment, for levelling of concrete floors before the installation of floor coverings.
SX220 Fast Setting Self Levelling Compound
SX220 is a fast setting cement based smoothing product
SX250 Moisture Tolerant Smoothing Compound
SX250 is a pre-smoothing and repair compound for clean, sound, porous substrates.
SX300 High Performance Latex Underlayment
SX300 is a two part general purpose smoothing underlayment for interior applications.
SX300-NA High Performance Latex Underlayment
SX300 NA is a two part general purpose smoothing underlayment for interior applications.
SX302 Moisture Tolerant Latex Underlayment
SX302 is a moisture tolerant cement based latex underlayment.
SX450 Compriband Epoxy Mortar
SX450 is an epoxy resin based mortar suitable for placing using hand tools. The three pack product consists of a resin base, a hardener and a bag of specially graded fillers. The working surface should be primed using CS200 Compriband Epoxy Primer. SX450 is easy to place using hand tools, it can be [...]
SX500 Rapid Drying Smoothing Compound
SX500 is a protein free moisture tolerant, fast drying, smoothing compound for interior applications.
SX600-NA High Performance Rapid Set Smoothing Compound – No Ammonia
SX600NA is a protein free, moisture tolerant smoothing underlayment that can be used over old adhesive residue in interior applications. Additionally, there is no need to prime if being applied to a TREMCO DPM. The product has a walk on time of 2 hours and can receive floor coverings after 4 hours.
TF448 High Performance Bonding Tape
TF448 double sided bonding tape.
- Waterproofing
CP150 MMA Concrete Primer
CP150 is a two component concrete primer, consisting of CP150 Resin and CP510 Initiator. CP500 Filler and CP508 Medium Fine Sand may be added when using as a high build primer.
CP151 MMA Metal Primer
CP151 is a two component, low viscosity metal and tile primer for TREMCO MMA Systems.
CP201 Compriband Jointspan FR
A Specially designed passive fire, cold smoke and acoustic sealing system for movement joints.
CP202 Compriband Jointspan Adhesive
CP202 is a water based flexible adhesive.
CP203 Compriband Thixotropic Epoxy Adhesive
A two part epoxy resin system. The base resin component is thixotropic plus a low viscosity liquid hardener. The two part system gives rapid strength gain obtaining mechanical properties several times those of high quality concrete. The product is non shrinking.
CP215 MMA Flexible Base Coat
CP215 is a flexible modified MMA resin base coat based on PUMA technology.
CP300 MMA Trowel Grade Resin
CP300 MMA Trowel Grade Resin is a medium/high viscosity, two part, reactive and colourless resin for TREMCO MMA Systems.
CP305 MMA Flexible Trowel Grade
CP305 MMA Flexible Trowel Grade Resin is a high viscosity, two part, reactive and colourless resin for TREMCO MMA Systems.
CP320 Fibre Reinforced Waterproof Coating
CP320 is a cold applied single pack, ultra high solids, moisture activated, elastomeric urethane containing inert reinforcement fibres. High elasticity allows membrane to “move” without cracking or splitting. Internal reinforcement often avoids the need to use dry reinforcement scrims, matting etc, [...]
CP360 MMA Flexible Membrane
CP360 is a medium viscosity, modified MMA, pre-reacted 100% solid membrane system based on acrylic monomers. To initiate curing, just add CP510 MMA Initiator.
CP380 Rapid Cure Membrane
CP380 is a heavy duty waterproofing system based on polyurethane modified methacrylates.
CP470 Heavy Duty Wall Coating
CP470 is a water based flexible coating system, formulated to provide effective protection to plaster and masonry as well as for as a protective and decorative coating to soffits, walls and upstands within concrete and masonry buildings/structures.
CP500 MMA Filler
CP500 is a light grey, medium grade free flowing powder for use as a filler with TREMCO MMA Resins.
CP507 Medium Sand
CP507 is a medium natural quartz sand.
CP508 Medium Fine Sand
CP508 is a medium-fine natural quartz sand.
CP510 MMA Initiator
CP510 is a white, free flowing powder.
CP581 Reinforced Polyester Fleece
CP581 is an outstanding reinforcing fabric with significant advantages over fibreglass and organic felts.
CP582 Polyester Fabric
CP582 is 100% stitchbonded, polyester fabric that offers an unusual combination of high strength properties with good elongation for excellent resistance against thermal stress. CP582 polyester fabric will not rot as it ages and it is resistant to moisture.
CP590 Colour Paste
CP590 is a colour pigment for use with TREMCO MMA Systems
CP592 Micronised Pigment Powder
CP592 is micronised pigment powder for use with TREMCO MMA Systems.
CP600 Reinforcement Band
CP600 is a reinforcement flashing that consists of a central strip of SEBS rubber flanked on either side by an absorbent non-woven felt.
CP610 Reinforcement Drain Detail
CP610 is an SEBS rubber sheet used for reinforcement at pipes, drains and other penetrations.
CP620 Heavy Duty Protection Course
CP620 is a reinforced modified bitumen protection course for waterproof membranes.
CP640 High Density Polyethylene Root-Proof Liner
CP640 is a High Density Polyethylene (HDPE) sheet used to provide an impermeable root-proof barrier.
CP650 Multi-Composite Drainage & Protection Board
CP650 is a two-part prefabricated drainage material and protection board. Available in a range of grades to suit specific installation requirements. The product consists of an extremely strong formed HDPE core covered on one side with a filter fabric.
CP660 Drainage and Water Attenuation Layer
CP660 is a low-profile, multi-layer drainage and water attenuation sheet for use as part of the TREMCO Green Roof System.
CP680 POWERply Air & Vapour Control Layer - SA
CP680 is a cold-applied, self-adhesive bituminous vapour control layer which is saturated and coated with high quality SBS (Styrene-Butadiene-Styrene) modified bitumen. It has a glass fibre and aluminium composite reinforcement, separating foil on the underside and is finished on the top side with [...]
CP681 POWERply Air & Vapour Control Layer - TO
CP681 is a torch applied, bituminous vapour control layer which is saturated and coated with high quality SBS (styrene-butadiene-styrene) modified bitumen. It has a 60 g/m² aluminium and glass fleece reinforcement, a thermo-fusible polyethylene film on the underside and is finished on the top [...]
CP683 POWERply Underlay - SA
CP683 is a cold-applied, self-adhesive bituminous underlay which is saturated and coated with high quality SBS (Styrene-Butadiene-Styrene) modified bitumen. It has a tough 200 g/m² glass fibre reinforcement and is manufactured with a single layer release film on its underside. In addition, the [...]
CP684 POWERply Underlay - TO
CP684 is a torch-applied, bituminous underlay which is saturated and coated with high quality SBS (styrene-butadiene-styrene) modified bitumen. It has a 180 g/m² polyester fleece reinforcement, a thermo-fusible polyethylene film on the underside and is finished on the top surface with a fine slate.
CP685 POWERply Capping - TO
CP685 is a torch-applied, bituminous cap sheet which is saturated and coated with high quality SBS (Styrene-Butadiene-Styrene) modified bitumen. It has a 180 g/m² polyester fleece reinforcement, a thermo-fusible polyethylene film on the underside and has a slate surfaced finish. CP685 also [...]
CP686 POWERply Capping - SA
CP686 is a cold-applied, self-adhesive bituminous cap sheet which is saturated and coated with high quality SBS (styrene-butadiene-styrene) modified bitumen. It has a strong 280 g/m² polyester/glass composite reinforcement and incorporates a special graphite additive within the coating to provide [...]
CP900 Dry/Chemical Sealer
CP900 Dry/Chem Sealer is a two component top coat, consisting of CP900 Dry/Chem Sealer, CP510 Initiator with the optional addition of CP590 Colourpaste.
CP910 Line Marker
CP910 is a flexiblilised, filled methyl methacrylate based linemarker.
CP930 MMA Waterproof Sealer
CP930 is a medium viscosity, flexible and UV protected surface sealer based on acrylic resins. The curing is initiated by addition of CP510 MMA Initiator.
CP935 MMA Clear Waterproof Flexi-Sealer
CP935 is a medium viscosity, flexible and UV protected surface sealer based on acrylic resins. The curing is initiated by addition of CP510 MMA Initiator.CS200 Compriband Epoxy Primer
CS200 is a two part epoxy resin system consisting of a base component containing solvent free epoxide resin plus a low viscosity liquid hardener. CS200 is applied using a suitable paint brush to give a thin continuous bond layer to clean prepared surfaces. CS200 is used as a bonding primer for [...]
- Glazing
JS055 CLEANER FOR MIXERS
JS055 is a powerful cleaner for 2 component mixers.
JS101 TWO-COMPONENT PUMPS LUBRICANT
JS101 is a powerful lubricant for two-component pumps.
JS336 HOTMELT BUTYL OUTER SEALANT
JS336 is a butyl-based hot melt sealant for IG units.
JS440 PU SEALANT FOR FLEXIBLE SPACERS
JS440 is a high performance, two-component, mercury-free, polyurethane secondary sealant.
JS442 MF MERCURY-FREE PU SECONDARY SEALANT
JS442 MF is a high performance, two-component, mercury-free, polyurethane secondary sealant.
JS443 MERCURY-FREE PU SECONDARY SEALANT
JS443 is a high performance, two-component, mercury-free, polyurethane secondary sealant.
JS444 MERCURY-FREE PU SECONDARY SEALANT
JS444 is a high performance, two-component, mercury-free, polyurethane secondary sealant.
JS562 HD SILICONE SECONDARY SEALANT
JS562 HD is a high modulus two-component elastomeric, neutral curing silicone sealant specifically developed for gas-filled IG manufacturing.
JS562 SILICONE SECONDARY SEALANT
JS562 Black is a high modulus, two-component, elastomeric, neutral curing silicone sealant specifically developed for IG manufacturing.
JS680 PIB PRIMARY SEALANT
JS680 is a one-component polyisobutylene-based primary sealant for insulated glass units.
JS780 S PIB PRIMARY SEALANT
JS780 S is a one-component polyisobutylene-based primary sealant for insulated glass units.
JS880 PIB PRIMARY SEALANT
JS880 is a one-component polyisobutylene-based primary sealant specially developed for the manufacturing of triple glass sheet and large-size IG units.
JS910 HYBRID SECONDARY SEALANT
JS910 is a 2-component hybrid secondary sealant.
SG635 Structural Glazing Spacer Tape
SG635 is a high quality structural glazing spacer tape. It is coated on both sides with high tack acrylic adhesive with blue filmic liner for easy release. It has an open cell structure to allow curing of structural silicones on all sides of the joint.
