ES101 TREMBlock DPM GT
One Coat Universal DPM
ES101 TREMBlock DPM GT is a one coat solvent free, low viscosity, two component epoxy resin. With excellent bond strength, ES101 TREMBlock DPM GT fully cured, is a damp proof membrane which can accommodate hygrometer readings up to 98%. (theoretically 99.9%RH).
.jpg)
Usage/purpose
ES101 TREMBlock DPM GT has been developed specifically to provide a guaranteed surface damp proof membrane with a single coat, where a structural damp proof membrane may not be present.
ES101 TREMBlock DPM GT can be used on unheated Anhydrite/Calcium Sulphate Screeds with a moisture content of 87%RH or less.
ES101 TREMBlock DPM GT is suitable for use on concrete and sand & cement screeds incorporating underfloor heating (surface temperature must not exceed 27°C in accordance with BS 8203 and BS 5325)
- Cost effective single coat application reducing time on site
- Protects the final floorcovering from residual construction moisture and rising damp
- Can be applied where a structural damp proof membrane is not present or is ineffective
- Accommodates up to 98% RH (theoretically 99.9%RH)
- Increased coverage up to 38%, 25m2 - 33m2 (dependent on application thickness)
- Can be applied to Anhydrite/Calcium screed-based screeds (without Underfloor Heating where readings are up to 87% Relative humidity.)
- Solvent free (In-line with BREEAM Compliance) Eco Friendly
- Suitable for concrete and sand & cement screeds incorporating underfloor heating (surface temperature must not exceed 27°C in accordance with BS 8203 and BS 5325)
| Tremco Flooring ES101 - Part A Safety Data Sheets (en-GB) Web.pdf | Safety Data Sheets | |
| Sealing tapes and membranes_GB_6N_1-0.pdf | Safety Data Sheets | |
| Tremco Flooring ES101 - Part B Safety Data Sheets (en-GB) Web.pdf | Safety Data Sheets | |
| Tremco Flooring ES101 - Part A Safety Data Sheets (en-GB) Web.pdf | Safety Data Sheets | |
| TR_ES101_datasheet_TREMBlock DPM GT_en-GB_v2.pdf | TDS |
