JS680 Inner Sealant

JS680 has been specially formulated to provide a barrier to moisture and gas (inner barrier) in the design of insulating glasses using rigid spacer bars.

Usage/purpose

Application. JS680 can be applied with extrusion machines that are commonly used in the insulating glass industry at a temperature of +110°C to +130°C depending on the desired pressure and extrusion speed. Wearing gloves is recommended while handling frames to prevent any fatty materials from being deposited on the surfaces, since this could weaken adherence and even create fogging. Apply a regular and continuous strip following a minimum pre-established thickness. Compression must ensure regular and sufficient deformation of the JS680 strip. Pay particular attention to the continuity of the JS680 strip in the corners.. For full application details, please refer to our Technical Data Sheet.

The information in this document is provided for informational purposes and are non-binding. Technical data are not expressly warranted characteristics of the goods. Because the variety of material used, the variety of application processes and the variety of conditions of use are beyond our control, preliminary tests are strongly recommended before any order.
The information and illustrations being reproduced on this document are based on features in progress and on our experience at the time of May 2015.The manufacturer reserves the right of modifying the technical characteristics of its products at any time. The warranty policy of these products is exclusively governed by our general terms and conditions of sales. Tremco CPG can not be held liable based on the general information given by this document.

The Technical and Safety Data Sheets must be read and understood before use.
The compatibility of JS680 is warranted with TREMCO IG sealants. It has to be checked for any other sealant.