Explore our brands

Have a question about our products or can't find what you're looking for ?

Contact Us
Back to product listing
CP910
Line Marker

CP910 is a flexiblilised, filled methyl methacrylate based linemarker.

CP910 can be used over TREMCO MMA systems for the distinctive marking of parking bays, direction arrows, etc.

  • Excellent flexibility, abrasion resistance and flow characteristics
  • Good petrol and oil resistance
  • Excellent ‘stand-out’ visibility for traffic management signage (arrows, stop signs etc.)

Application Conditions

The product can be applied at substrate and ambient temperatures between +3°C and +35°C.

Method of Application

  • Stir the contents of the tub thoroughly.
  • Add CP510 Inititator at an addition rate of 2% by weight while stirring at a slow speed and mix for 2 minutes.
  • Ensure that the material on the base and sides is mixed in.
  • Ideally the entire material should be re-potted once.

For full application details, refer to product data sheet or contact tremco illbruck customer services on 01942 251400.

Technical data

PROPERTYRESULT
CompositionA two pack filled methyl methacrylate based material
Pot Life
(@ 20°C)
Approximately 10 minutes
Rainproof
(@ 20°C)
After approximately 20 minutes
Walk on Time
(@ 20°C)
After approximately 45 minutes
Re-Coat Time
(@ 20°C)
After approximately 45 minutes
Full Cure
(@ 20°C)
Approximately 2 hours
StorageStore in a cool dry place protected from frost
Shelf Life6 months when stored as recommended in original, unopened containers
    Downloads

    Product Finder

    Application Area
    Products
    Systems